Skip to Content
SignalWise

How alerts are triggered

Thresholds, volatility and the rules that decide when an alert fires.

Thresholds are computed every night

Every night, SignalWise computes a set of threshold prices for each asset from its price history. During the day, a live price that crosses a threshold creates an alert. A price that only touches the threshold does not.

Standard deviation: the volatility measure

Several rules use the standard deviation. It measures an asset's usual volatility, in other words how much its price normally moves. It is calculated on the closing prices of the last 20 trading days.

Using it makes alerts adapt to volatility: a 6% move can be normal for a very volatile stock and trigger nothing, while the same move on a calm stock is unusual and triggers an alert.

Sharp moves

A Sharp Move Up (AggressiveMoveIdentificationAlertHigh) compares the price during today's session with yesterday's close. It fires when both conditions are met:

  1. The rise is at least the minimum move for the asset class (5% for stocks).
  2. The rise is larger than 2 standard deviations. This checks that the move is unusual for this specific asset.

Sharp Move Down (AggressiveMoveIdentificationAlertLow) uses the same rule, downwards.

Asset classMinimum moveAnd
Stocks, ETFs, crypto5%larger than 2 standard deviations
Forex, commodities1.5%larger than 2 standard deviations

Example: Sharp Move Up

Yesterday's close: $147. Current price: $155, so +5.4%. The standard deviation is $3. The $8 rise is larger than 2 × $3 = $6. Both conditions are met: the alert fires.

Gaps

A Gap Up (GapUpAlert) uses the same two conditions, but compares today's opening price with yesterday's close. It fires when:

  1. The asset opens at least 5% above yesterday's close.
  2. This jump is larger than 2 standard deviations.

Gap Down (GapDownAlert) uses the same rule, downwards. The difference with a sharp move: a gap is about the jump between yesterday's close and today's open, not about the move during the session.

Example: Gap Up

Yesterday's close: $395. Opening price: $430, so +8.8%. The standard deviation is $15. The $35 jump is larger than 2 × $15 = $30: the alert fires.

Gap alerts need a market open, so they are not sent for crypto and forex.

Range breaks

When a range break alert talks about the recent period, it means the last 50 trading days, about 2.5 months.

A High Range Break (HighRangeBreakAlert) fires when the lowest price of the day is above the highest price of the last 50 trading days, plus a margin of 0.1 standard deviation. In other words, the price must have stayed above its former range since the open. Touching the 50-day high is not enough.

A Low Range Break (LowRangeBreakAlert) is the same rule, downwards: the highest price of the day stays below the 50-day low, minus the margin.

Example: High Range Break

Highest price of the last 50 trading days: $135. Standard deviation: $4, so the threshold is $135 + 0.1 × $4 = $135.40. The lowest price of the day is $140, above the threshold: the alert fires.

Price levels

  • 52-week and 50-day highs and lows: the price goes beyond the highest or lowest price of the period.
  • If a 52-week and a 50-day alert would fire on the same side, only the 52-week alert is sent.

Thresholds can be adjusted per client and per asset class. See Filters & configuration.

Technical indicators

  • MACD Bullish Crossover: the price at which MACD would cross above its signal line. Needs at least 26 days of history.
  • Death Cross: the 50-day average crosses below the 200-day average. Needs at least 200 days of history.
  • RSI Overbought: the 14-day RSI stays above 70 for 3 consecutive trading days.

New listings without enough history do not get these alerts until enough data is available.

Safeguards against false alerts

SafeguardWhat it does
Bad-tick filterA price that jumps implausibly from the previous tick is ignored (more than 5% for ETFs and indices, 3% for forex, 10% for commodities and futures, 20% for crypto).
Stale-data guardNo alerts are created when the price data is not from today.
Split-day skipAssets are skipped on the day of a split or reverse split, so a split alone never triggers an alert.
Ticker changesTicker and exchange changes are detected automatically to avoid mapping errors.
Gap rulesGap alerts need a market open, so they are not sent for crypto and forex.

What does not trigger an alert today

  • Gradual moves over several days. Each rule looks at one trading day. A 10% drop spread over a week, with no single day above the threshold, does not trigger an alert.
  • Pre-market and after-hours moves. Alerts are generated during regular trading hours only.
  • Corporate events on their own (earnings, M&A, dividends). They appear in the reasoning when they explain a price move.
  • Assets outside your universe. See Coverage.

Rules can evolve

These rules describe how alerts work today. To improve the product, Bridgewise may adjust them, in particular the thresholds and calculation periods. The examples on this page are illustrations.

On this page